RyanTAdams.com

Technology Advice by Ryan Taylor Adams

Use the Recovery Console Without a Password

May 10th, 2008 · 4 Comments · Printer Friendly Version

WARNING! THIS POST IS MORE THAN 180 DAYS OLD!

While I make an effort to update older posts to keep them relevant and technically accurate, the rapidly changing nature of the tech world makes it possible that the content of this post may no longer be relevant, current, or even accurate. Additionally, because of this post's age, adding new comments has been disabled. If you would like to contribute new information to this post, or have questions pertaining to this post, please use the Contact Form.


When using the Windows Recovery console, you are normally prompted for the password of the administrator account. Without this password, the recovery console will not load. In some situations, the Recovery Console won’t accept the password you provide even if it’s correct. If this is the case, or if you simply don’t know the Administrator’s password there is still hope.

Pnordah has put together a boot disk that, when booted from, will allow you to directly edit the Windows registry. One of the options is to set a registry key which tells the Recovery Console to not ask for a password. Here’s what you’ll need to do:

  1. Download this ZIP file containing an ISO CD image.
  2. Extract the ISO file and then use it to burn a CD. (Note, do not just burn the ISO file to a CD as you would other file types. The ISO file is an image file and needs to be burned appropriately.)
  3. Put the new CD in your computer and boot from it.
  4. You will see the boot CD load, and then be presented with a line that reads “boot: “.
  5. Press enter.
  6. You will then be presented with a list of Windows partitions (usually just one unless you dual-boot) preceded by a number.
  7. Type the number corresponding to the Windows installation you want to use (this is usually “1″) and press enter.
  8. It may take several minutes for the partition to be mounted. Be patient.
  9. Once the partition is mounted, you will be asked for the location of the registry directory. Don’t type anything, just press enter.
  10. You will be asked which part of the registry to load. Type “2″ and then press enter.
  11. After the next menu is displayed, type “3″ and press enter.
  12. You will now see a line that starts “Administrator Password Login:”. If immediately after this you see “ENFORCED (0)”, your computer requires you to type the administrator password to use the Recovery Console.
  13. Type “y” and press enter to remove this requirement.
  14. You will be returned to the previous menu. Type “q” and press enter.
  15. You will be asked to confirm the changes. Type “y” and press enter.
  16. At the next prompt just press enter.
  17. You can no eject the CD and restart your computer by holding down CTRL-ALT-DEL.

The requirement to enter an administrator’s password has been removed from the Recovery Console. You can now boot into the Recovery Console as normal.

4 responses so far ↓

  • 1 Sanford // Oct 10, 2008 at 1:04 PM


    tried twice. program runs just as you said. still asks for password. any other ideas?

    Thanks

  • 2 Ryan Adams // Oct 11, 2008 at 7:28 PM


    @Sanford: When you get to step 12, is “Administrator Password Login” listed as “ENFORCED”?

    Are you able to boot into Windows normally?

  • 3 Clueless // Jun 6, 2009 at 10:13 AM


    Worked perfectly. Many thanks.

  • 4 Antoine // Jul 3, 2009 at 11:53 AM


    The next menu never comes up after I type 2. It says segmentation fault chntpw failed(returncode139)

  • 5 Ryan Adams // Jul 4, 2009 at 9:02 AM


    @Antoine: Try getting the latest version from http://home.eunet.no/pnordahl/ntpasswd/bootdisk.html and burn a new CD. It sounds like either the CD you made is corrupt, or there is a problem with accessing your computer’s registry.

  • 6 Christopher // Jan 18, 2010 at 9:42 AM


    This has got to be the biggest help i have ever recieved online. Thank you so much now i can continue my way to fixing my computer