I’ve closed commenting on this post. If you are still having problems, please triple check all the points above. 90% of the people who have contacted me have simply skipped a step or mistyped a command.

If you are still having trouble, visit the Tech Support Services link in the upper left of this page to learn about paid support options.

@heri: Be sure to triple check the TFTP32 settings. Make sure that the “Starting address” is set to 192.168.1.10 and that the IP of your server is manually configured to be lower than that.

If all the settings are indeed correct, try using the “netsh” command on the m200 as detailed above.

i already follow your step by step but when i turn on my m200 (step 11) my m200 won’t state ip 192.168.1.10 it alwayshave the same ip as my ‘server’. i already check a dozen time in my dhcp server setting but still couldn’t find the mistake i would probably make. help please….

@Shaun: Windows PE is included with the download. It is the basic operating system that is loaded over the network.

Try typing “ipconfig /all”. If the text “Windows IP Configuration” is still the only response, it indicated Windows PE is hanging while checking your IP address. This could be due to a corrupt download, incorrect setup, or a hardware problem. Try redownloading the ZIP file from my site and starting over fresh.

Many thanks for your reply. I stayed up till 5am sorting it out and finally cracked it! Turns out I was not entering the space after “y:”

I cannot thank you enough for your wonderful guide. Donation on its way….you’ve definetely earned it!

Cheers